This is a two step process. Usually, you can forget and reconnect to the Northwestern network. In the bottom right of the system tray, click the wireless icon to open up the list of available networks. Select Northwestern and click Forget. Wait until the connection has been forgotten, then select Northwestern again, click Connect, and sign in with your NetID and NetID password. You should now be reconnected. If not, you will need to manually delete your old wireless configuration and create a new one with the step-by-step instructions below.
- Deleting your old wireless profile with your old NetID password
- Press the Windows key or open the Start menu, then search for Settings.
- Select Network & Internet.
- Select Wi-Fi in the left panel.
- Click the link Manage Wi-Fi Settings. You might have to scroll down to find this setting if there are a large number of known or available networks.
- Under Manage Known Networks, select Northwestern and then click Forget.
- Press the Windows key or open the Start menu, then search for PC Settings.
- From the left side select the Connections tab, and under the Wi-Fi section click Manage Known Networks.
- Select Northwestern and click Forget.
- Press the Windows key, then enter Control Panel into the search bar and press the Enter key.
- In the Control Panel, select Network and Internet, then select Network and Sharing Center.
- On the left-hand pane, click Manage Wireless Networks.
- Right-click the current Northwestern connection and click Remove.
- If prompted with a warning click OK.
- Creating a new wireless profile with your new NetID password
You should then be able to connect to the Northwestern network by selecting Northwestern from the list of available wireless networks.
- Search for Network and Sharing Center in the search bar (press the Windows key to open the search), then select Network and Sharing Center.
- Select Set up a new connection or network.
- Select Manually connect to a wireless network.
- Enter the Following:
- Network name: Northwestern
- Security type: WPA2-Enterprise
- Encryption type: AES
- Select Next, then Change connection settings.
- Click the Security tab. Under Network Authentication Method, select Protected EAP (PEAP).
- Uncheck Remember my credentials for this connection each time I'm logged on and click Settings.
- In the Protected EAP Properties window:
- Check Verify the server's identity by validating the certificate.
- Check Connect to these servers, and enter netauth2.northwestern.edu
- Under Trusted Root Certificate Authorities, check the AddTrust External CA Root and UserTrust RSA Certification Authority checkboxes.
- Select Authentication Method: Secured Password (EAP-MSCHAP v2) and click Configure, then uncheck Automatically use my Windows logon name and password (and domain if any), and click OK.
- In the Protected EAP Properties window click OK.
- In the Northwestern Wireless Network Properties window select the Advanced settings.
- In the Advanced Settingswindow:
- Check Specify authentication mode.
- Select User authentication from the drop-down menu.
- Select Save credentials.
- In the Windows Security box, enter your NetID and NetID password, then click OK.